What an HVAC contractor license covers in Utah, Hawaii and Arizona
The HVAC contractor license you need depends on the state where the work will be done. Utah, Hawaii and Arizona each name the work in a different way, and each board has its own forms, exams and experience rules.
Picking the wrong classification can delay an application or leave work outside the license you hold. Confirm the current rule on the official board site before you file, because boards update requirements.
Every state license board has its own requirements, forms, and deadlines. Oregon is summarized in two lines below, with a link to the full classifications post for that state.
Oregon in brief
Oregon’s Construction Contractors Board lists heating and air conditioning among work that needs a CCB license, as explained on the CCB license page. For the Oregon details, see our post on Oregon contractor license classifications.
Utah’s H100 HVAC classification
Utah now uses the H100 classification for HVAC contractor work. The Division of Professional Licensing (DOPL) posted the current requirements on its contracting page.
The new H100 rule took effect on March 30, 2026. From April 20, 2026, every H100 application submitted online or postmarked on or after that date must meet the updated requirements.
If you still have older printed forms or an older article that describes the S350 class, set those aside. Use the current DOPL page and the current application forms, which DOPL said would be available on April 20, 2026.
What Utah asks of H100 applicants
DOPL lists several requirements for H100 applications on or after April 20, 2026. Qualifiers must hold RMGA or equivalent certification.
Applicants must pass the Utah Business and Law Exam and the HVAC (H100) Exam through Prov. They also need two years of HVAC-specific experience, verified by W-2 forms.
If the work was paid through a payroll agency or a professional employer organization (PEO), supporting documents must be included. DOPL also lists updated insurance minimums, which should be read on the official page rather than copied from an older guide.
A fingerprint-based background check requirement takes effect on January 1, 2027, according to the same DOPL contracting page. Plan for that date if you will apply on or after it.
What the Utah H100 license covers, and what it does not
Utah Administrative Code R156-55 defines the H100 scope. It includes fabrication and installation of complete warm air heating, air conditioning and ventilating systems, and installation of refrigeration equipment.
The H100 scope does not include electrical or plumbing trade work. Gas line work is outside the scope unless the qualifier and the technician doing that work are Certified Natural Gas Technicians under the rule.
The rule also brings radon mitigation work under the S354 classification into the H100 scope. An H100 licensee may contract with certain licensed electrical and plumbing contractors for work outside that HVAC scope, as the rule lists.
A person who held an active S350 HVAC contractor license in good standing as of January 1, 2026, is deemed to hold an H100 license. That status lasts for the rest of the licensing period ending November 30, 2027. Watch renewal notices well before that date and confirm the current H100 rules with DOPL.
Hawaii classifications that cover HVAC work
Hawaii licenses this work under specialty classifications published by the Contractors License Board. The official description of contractor license classifications (January 2026) is the document to check.
C-52 is the ventilating and air conditioning contractor classification. It covers fabrication, assembly and installation of warm-air heating and air cooling systems, complete ventilating systems and complete air conditioning systems. The official description also includes installation of heat pumps related to the air conditioning system.
C-40, the refrigeration contractor classification, covers equipment and spaces used to control air temperature below fifty degrees Fahrenheit, including walk-in refrigerator boxes. That is a different scope from typical comfort cooling.
C-4 covers boiler, hot-water heating, hot water supply and steam fitting work, including certain boiler-connected radiant systems. A hydronic or boiler job may need this classification even when a cooling job would fall under C-52.
Read the official descriptions before you decide which classification to apply for. Our post on Hawaii contractor license classifications can help you compare the classes, but the board’s PDF is the primary source.
The Hawaii Contractors License Board page is the place to confirm current forms, exams and application steps. Do not assume a California license or another state’s class will transfer on its own.
Arizona experience rules for a qualifying party
Arizona licenses contractors through the Registrar of Contractors. Classification names and scopes should be confirmed on the registrar’s official materials, because those lists were not reproduced here.
What can be stated from the statute is the experience rule for a qualifying party. Under Arizona Revised Statutes section 32-1122, the qualifying party must have four years of trade or management experience. At least two of those years must fall in the last ten years.
The registrar may reduce that experience requirement. Training may also stand in for a portion of the experience, up to two years, as the statute provides.
That wording comes from the statute, not from a secondary summary. If you have seen a shorter or different experience statement on an older page, use the statute and the registrar as the check.
For the broader Arizona application path, see our post on the Arizona contractor license. The board still decides whether an application is approved.
Electrical, plumbing and gas work around an HVAC job
An HVAC job often touches other trades. A new circuit, a new gas line or a change to a water line may sit outside the HVAC classification you hold.
Utah’s rule is explicit about electrical, plumbing and gas limits on the H100, as described above. Hawaii’s C-52 description also carves out electrical controls, which is a reminder to read each scope line by line.
Arizona work should be checked the same way against the classification you will hold. If the job includes work you are not licensed to perform, plan for a properly licensed contractor on that portion.
How the three states differ at a glance
Utah now uses a single H100 class for HVAC contractor work, with a 2026 transition from S350. Hawaii splits related work across C-52, C-40 and C-4, so the job description matters as much as the word “HVAC.”
Arizona’s current classification labels should be read on the registrar’s official materials. The experience rule in section 32-1122 still applies to the qualifying party, whatever class name you confirm.
Exams, certifications and document lists also differ. Utah’s RMGA requirement and two specified exams are a good example of a state-specific step that should not be assumed elsewhere.
Records that help you prove HVAC experience
Boards ask for proof, not only a job title. Utah wants W-2 forms for the two years of HVAC-specific experience, plus extra documents when a payroll agency or PEO paid the wages.
Keep a file of W-2s, pay records, contracts, permits and a short description of the work you performed. Dates and the name of the licensed contractor who employed you matter as much as the work itself.
Hawaii and Arizona have their own experience and documentation rules. Use each board’s current application instructions, and do not assume one state’s packet will satisfy another.
If you work in more than one state, build a packet per state. Shared records can be reused, but the forms, exams and experience tests still differ.
What to confirm before you apply
Confirm the classification name, the experience rule, the required exams and the current forms on the official board site. Then confirm insurance, background check and any trade-specific certifications, such as Utah’s RMGA requirement.
Do not rely on an old blog post, including one written before Utah’s 2026 H100 change. Dates, exams and documents can change, and only the board’s current materials control.
A1 Contractor Services prepares complete, accurate application packages so you can focus on running your business. We do not decide the outcome, and we do not promise approval or a filing timeline.
If you are ready to review your HVAC contractor license plans for Utah, Hawaii or Arizona, call (916) 659-6987, email license@a1contractorservices.com or contact us. Bring the state, the work you want to perform and the records you already have, and we will help you prepare the package the board asks for.
Licensing rules, deadlines and classifications change. Confirm every requirement on the official board site, or in the official statute or rule, before you apply.
A1 Contractor Services prepares application packages. The license board decides whether to approve them.
